E-mail: inquiry@fireproofworkwear.com

Contact us
NO.103 JinSui Road,
Xinxiang City,
Henan provice,China


E-mail:
inquiry@fireproofworkwear.com


TEL:+86-373- 3070977

FAX: +86-373-3031757 

Phone:+86-13803809766
HOME>News>Industry news>Industry news
What you need to know about flame-resistant clothing
2015-05-14 08:25  Clicks:
Since flame-resistant (FR) clothing for petrochemical and utility workers has become the rule rather than the exception, you may be faced with a bewildering array of garment and fabric choices. But before any decisions can be made, you need to know which fabrics and garments are in compliance with your needs. And that means knowing exactly what compliance means, what the performance specifications are, and how they are determined.
 
Regulatory requirements
 
The first step toward compliance is knowing which regulations you must meet. Three OSHA regulations are used as the basis of requiring flame-resistant clothing:
 
1. OSHA’s 1910.269 Maintenance Standard applies to electric utilities and industrial co-generation plants when maintenance is performed on existing facilities. The maintenance standard mandates that personnel who work around energized parts must not wear clothing that, if exposed to an electric arc, could contribute to the extent of burn injury. In simple terms, this means that the clothing cannot ignite, so wearing polyester, nylon rayon, or acetate (unless FR treated) is out of the question.
 
2. OSHA’s 1910.132 General Duty Clause requires employers to identify risks and protect employees from hazards in the workplace. The rule applies to many types of personal protective equipment, and has been used to cite employers that did not require the use of flame-resistant protective apparel.
 
3. OSHA’s 1910.119 Process Safety Management Regulation requires employers to assess risk throughout the entire manufacturing process to ensure that the process is safe. While the standard does not specifically require FR clothing, OSHA has used this standard more frequently than the General Duty Clause as the basis of citing employers for not requiring FR clothing.
 
Performance specifications
Once you know the standards you’re required to meet, it’s important to know the differences between the performance specifications related to the flame-resistant clothing you will provide for employees.
 
ASTM’s F1506-98 standard performance specification for clothing worn by electric workers requires the fabric to be flame resistant, which means it won’t ignite or continue to burn after exposure to an ignition source. The standard is currently being revised to include the requirement of reporting an Arc Rating.
 
ASTM’s F1891-98 standard for arc and flame-resistant rainwear applies to flame-resistant, waterproof materials used in rainwear. These garments can be made from coated or laminated fabrics. The standard is currently being revised to include a fabric flammability test more suitable to coated fabrics.
 
NFPA’s 2112-XX standard for flame-resistant garments for protection of industrial personnel against flash fire is currently under development and will be the first U.S. standard that specifically addresses the need for industrial flame-resistant uniforms. It’s scheduled to be finalized in 2001.
 
NFPA’s 2113-XX standard regarding the selection, care, use and maintenance of FR clothing, which is also under development, will serve as a sort of user’s guide for industrial flame-resistant clothing. It addresses topics such as purchasing, cleaning, repairs, storage, decontamination, retiring garments and proper use procedures. This standard will require that garments be certified to NFPA 2112.
 
Test methods
While it’s good to know the various performance specifications, it is meaningless unless you know the test methods used to determine whether fabrics meet these specifications.
Meeting specifications for clothing worn by electric utility workers
 
ASTM’s F1506-98 fabric specification for clothing worn by electric workers relies upon the FTM 5903.1 Vertical Flammability Test, which determines whether a fabric will ignite and continue to burn after exposure to an ignition source. The test method sets criteria on how the test should be conducted (sample size, number of trials, type of flame, etc.), but does not establish performance requirements. To pass this test and be included in ASTM’s Fabric Specification for Clothing Worn by Electric Workers, the garment must have a vertical flame test maximum of two seconds afterflame and six inch char length when it is new and after 25 home launderings.
 
Also pending inclusion in F1506 is ASTM’s F1959-99 Arc Thermal Performance Value Test, which measures the amount of thermal protection a fabric would give a wearer if the person was caught in the vicinity of an electric arc. The ATPV is defined as the arc energy required to cause the onset of second-degree burn when a person is wearing the fabric. The higher the ATPV, the more protective the fabric.
 
This test is only conducted on flame-resistant fabrics to measure protection from the heat and flame by-products of an electric arc. It does not indicate any protection from contact with an electric arc.
Communicate With US

Phone:0086-373- 3070977
E-mail:inquiry@fireproofworkwear.com
Copyright Xinxiang Yulong Textile Co., Ltd.